每日维护和维护吹塑机

通常在塑料工业的吹塑机中看到它是一种塑料加工机械。目前，市场上的一台吹塑机是数万人民币，甚至成千上万的元素，因此我们每天都用于 维护和维护 措施，它可以延长机器的寿命，以减少巨额支出。

1，当您启动高压和低压气源开关时，必须缓慢动作，以防止快速污垢吹动电磁阀的空气供应速度，同时打开排气门30秒钟，请确保空气清洁。

2，从必须说服机器的机械零件，机器内部没有人，没有 混乱的时候开始。特别是曲柄位置，以免受伤。同时关闭安全性。 14，启动机器时，您必须首先启动电动机，如果电压波动，则延迟延迟启动加热机。

在开始冷却码头机之前，请确保冷却水是打开的。3。开始加热过程（2-3分钟）后，等待烤箱温度均匀升高，然后按下按钮。在同一时间吹瓶电源时也应打开，否则不会吹瓶。

主动风环是一种在线实时控制系统，由散布在风环上的几个电动机控制。通过风扇冷却，从风环风室中的风圈中的气流在每个空气导管上持续的压力分布后，由电动机驱动的阀门作为驱动器以调节tuyere和空气量的驱动器，从而改变了头膜冷却量的变化，并换取了较薄的膜片，并换取了较薄的薄膜，并构成了厚度的厚度，并且是厚实的厚度，是厚实的厚度，是厚实的。 find a clear link between motor control quantity, not the same as the thickness of thin film thickness change and control quantity and valves different azimuth range between nonlinear irregular changes of each adjustment are of great influence on adjacent point when a valve, and adjustment has lag, and related to each other, between the different hour about this kind of highly nonlinear, strong coupling, time-varying and controlQualitative system and its accurate mathematical model couldn't set up, even if can establish mathematical model, and also very cluttered and difficult to solve, cause no practical value, and traditional manipulation is concluded that the manipulation of the model to the better control effect, and about the highly nonlinear, qualitative, mixed and disorderly response information manipulation of the effect is very poor and even less.For this reason we have chosen the ambiguous manipulation algorithm.This kind of skill has the characteristics of low cost, convenient通过冷却水管，排气区域的大面积划分等诱导和选择保护技能。